E-Clips

Surge Suppression products – Telephone Systems

DLT 1P or 2P or 3P or 4P (xxx)
this unit is a parallel hardwire device and should be installed at the
box where the telephone service enters the building depending on how
many lines come into the building i.e. DLT 1P 200 for a single line
with ring voltage, DLT 2P 200 for two lines with ring voltage etc…
(xxx) = Specify Voltage Required: 15V, 30V, 60V or 200V. Other voltages available on request. (15V, 30V and 60V are typically used on leased or dedicated lines. 200V is used for ring-up lines.)

ILDCP Series Models: These are UL listed 497B in-line series screw terminal multi-stage hybrid devices. These
units are designed to protect the equipment with its close clamping
ability at high-induced voltages. There is a ground lug provided. Only use if you have a common ground i.e. single ground for entire system to prevent ground loops.

DLT 3S 200 is
an in-line series Modular RJ11 plug-in multi-stage hybrid device for
your Telephone, Answering Machine, Fax, and Modem ring- up lines.

DLT TOS 200 is
an in-line screw terminal multi-stage hybrid device for your Telephone,
Answering Machine, Fax, or Modem ring-up lines. (Note: optional voltages available: 15V, 30V, 60V are typically used on leased or dedicated lines. 200V is used for ring-up lines.)

3NF or 1206CS or 1P are 110-volt AC plug-in devices for KSU and PBX, Modems, Answering machines, Cordless phones, Fax machine etc.

Custom Product: We will manufacture products to meet your specifications and needs. Please contact factory for pricing and delivery.

Should you have any questions or require assistance with the installation, please call 800-526-1556 for technical assistance.