Home › Fire Systems

DLT TOS 200 For Fire Systems

ILDCP Series

Isolated Loop Circuit Protector for Communication Lines

DLT TOS 200

These are UL listed 497B in-line series screw terminal multi-stage hybrid devices. These
units are designed not only to protect equipment but also reduce the
incidence of false alarms due to its close clamping ability at
high-induced voltages. There is a ground lug provided. Only use if you have a common ground i.e. single ground for entire system to prevent ground loops.  200 Volts DC to be used on equipment connected to your telecommunication lines with ring voltage. i.e.(RJ31X)

Specifications - Operating:

Maximum Operating Voltage:

 200 Volts

Typical Leakage Current:

< 5u amps

Maximum Data Rate:

22 Kbps

Operation Temperature:

-40 c to +85c

Connectors:

Terminal Block

Lines Protected:

One Pair

Installation Configuration:

In-Line Series

Specifications - Electronic:

Maximum Surge Current ( 8x20us)

10,000 Amps Per Line

Maximum Surge Voltage (1.2 x 50us):

6,000 Volts

Capacitance:

<250 pf

Clamping Voltage:

210 Volts DC

Clamping Response Time:

<5 Nanoseconds

Voltage:

Voltage Sensitive

Pass Voltage Test to ANSI/IEEE B3:

10% Above Normal

Power Dissipation (8 x 20us):

60,000,000 VA Protection Per Line

Dimension:

Depth: 1" Width: 2" Length: 1½"

Tabs: ½" each

E-Clips surge suppressors have a Lifetime Product Warranty. Please see warranty statement for complete product warranty information.