E-Clips

Surge Suppression products for Computer Systems:

1P: Single outlet surge suppressor for use on a laptop/notebook computer.

1206CS: This is a 6-outlet AC suppressor that also provides telephone protection and has a 6’ cord. The
1206CS incorporates state-of-the-art technology and provides
multi-stage hybrid protection for your electronic equipment with a
maximum current draw of 15 amps and provides both common and normal
noise filtration. The 1206CS unit is rated UL1449 2^nd edition. Installation is behind each PC at the AC receptacle to protect the power supply and modem. Note: If you plug in ahead of the UPS or battery back up it will also protect them.

RS232/DB25 or RS422/DB9: These
are high-speed data line surge suppressors that incorporates state of
the art technology and provides multiple stages of protection for
equipment connected to your data lines. These are installed at the specific serial port of the PC.

10 Base T: This unit is for the 10MB 2-pair data line applications with a Cat. 5 RJ45 jack and plug. This unit is installed at the PC and/or Hub.

100 Base T: This unit is for 100MB 4-pair data line applications with a Cat. 5 RJ45 jack and plug. This unit is installed at the PC and/or Hub.

DLT 3S/200 DSL: 200 Volts DC to be used for modems connected to digital signal line or telephone line with ring voltage. The DLT 3S/200 has RJ11 jack and plug and should be installed at the PC.

CCTV CM: This is for your coaxial cable Internet modem line. This should be installed in front of the cable modem to protect it and any PC down-line.

Should you have any questions or require assistance with the installation, please call 800-526-1556 for technical assistance